Cell Phone Antenna Booster Truth
Boost cell phone signal in your building with a repeater cell phone wireless
Cell Phone Signal Boost your building
A mobile phone with wireless repeater
By David Jones
www.UnwiredSignal.com
Card Boost Air computer signals in a building with a wireless repeater, also.
Concept
If you do not have a cell phone signal inside your home, office, car, or cab and you have a good enough signal to make cell phone calls outside of it, you can have a cell phone signal wireless inside, too.
You are likely skeptical of this statement. I would, too. The truth is, I'm in this business because my frustration with dropped calls and no cell phone service where it should be. It just made no sense to me that NASA (NASA is now one of our customers UnwiredSignal.com) could talk to a man on the moon, 238.000 miles, and I could not talk to someone in the corner. I I am so angry one day in 2000 I decided that there should be a better way.
cell phone signal stimulating work. It works the way your television signals are amplified by the antennas, dishes, amplifiers and / or cable boxes. Use a cell phone or computer air card inside a building is like watching television in a building with rabbit ears only.
Boosting cell phone signals, or any other radio wave, is not with smoke and mirrors and it does not just sometimes. If you have a cellular signal to the outside, it can be repeated on a predetermined wireless indoor area, pure and simple. The forms and materials to do with have been around for decades.
An explanation may be the cellular repeater system use:
For cell phone wireless signal to be repeated within an average home or small building, the product you need to project the signal in a given region is called a "repeater system kit.
What is a cell phone wireless repeater?
As the picture above shows a kit relay system consists of an external antenna which is connected by coaxial cable (usually) a fuse of lightning. It then connects via coaxial cable, which connects to an amplifier via a coaxial cable to an antenna inside.
How a wireless cell Telephone Repeater system work?
For incoming calls, the external antenna captures the signal outside and it stimulates. He sends the amplifier, which stimulates more, and it grows through the antenna inside, to be projected in a region given. The size of this zone can be thought of in advance, if you are sure that you buy a product that actually do what you need have done (what a surprise, eh?).
Most cellular repeater signal is bi-directional. For outgoing calls, the sequence is just reversed.
Choose the frequency of use
cellular signals are broadcast in America on 824-894 MHz or 1850-1990 MHz. except for Nextel (not to be confused with the parent company, Sprint). Nextel operates on 806-866 MHz Part walkie-talkie 1850-1990 MHz for the telephone component.
You do not need a dual-band rehearsal at a fixed location unless you have the people who use multiple service providers. This is because the device, a cellular phone used alone, a map of the air computer or a cell phone repeater, taking only the strongest signal.
If your service provider uses a single frequency, as, for example, which uses TMobile 1900 MHz only, your choice of relay system frequency of use is easy. Tmobile uses only 1900 MHz you buy the 1900 MHz cell phone signal booster system.
If your service provider uses both the 800 and 1900 MHz, You decide which one to use is always easy. Your cell phone and / or the card looks computers use a single frequency both (the highest), if they use a system with or without a booster. You can use either signal repeater cellular phone system system 800 MHz or 1900 MHz system.
When the two frequencies are used by your service provider we recommend using system 800 MHz repetition because it works better and costs less. It's hard to believe, but true. Because he takes more than twice the power of projecting a 1900 MHz signal at the same distance of 800 MHz.
If you will be using your card for computer air load data files regularly, you can use the 1900 MHz repeater because the 1900 MHz 65 dB handles up to 3.4 times faster than the 65 800 dB MHz repeater system.
Do not, however, use 50 dB Dual Band SOHO Repeater for cell system 1900 MHz.
For 800 MHz, most homes and offices to 10,000 square meters may use a standard, 50 dB signal gain Kit repeater system as our Wilson B 801 245 if 3 or more bars of signal strength on your cell phone, outside – on the ground.
1900 MHz Important Note: You need to push more gain 1900 MHz that is pushing 800 MHz. Therefore, you need an amplifier 65 dB for your repeating system have the same power as the dB 50 800 MHz. In 1900 the standard kit MHz repeater, as our Wilson 801,365 B.
Cell phone signals will penetrate plaster standard and it can usually go through 2-3 walls of it without any problem. They do not penetrate solid wood, concrete, brick or metal.
The choice of the power of your repeater system
Worthy of signal enhancement of cell phone companies to provide detailed installation instructions in the kit, further, during telephone consultation and after installation. The average home and office applications are simple and take only a few hours to install, if purchased from a reputable dealer.
But unless you're familiar with this kind of products, you are in trouble by buying them from someone who does not ask many questions about your signal problems and what you are trying to achieve before selling them to you. We can not even not make an appropriate recommendation to the product without knowing the answers.
We firmly believe that the most important element in the system of a cellular repeater dealer known to the seller, experience and commitment to your needs above potential profit.
About the Author
UnwiredSignal.com Questions? Call us at the store in Dallas, TX anytime from 9 AM to 6 PM Monday-Friday. We are happy to help you. 214-774-2588 or toll free 888-713-1243.